Why Is My Rebounder Squeaking?
Ever hopped onto your rebounder trampoline only to be greeted by a squeak louder than your kids on a sugar rush? The short answer: it’s usually dry springs, loose bolts, or friction. Keep reading to uncover quick fixes and bounce back to a silent workout.
Why is My Rebounder Squeaking? The Common Causes
A squeaky rebounder isn’t just annoying. It can turn a fun workout into a test of patience — and sometimes it points to a bigger issue. Let’s break down the usual culprits.
The Springs: The Most Common Culprit
Friction and Metal-on-Metal Contact
Springs are the heart of your rebounder, and they’re often the first to complain. When the lubrication wears off, you’ll hear that tell-tale squeak as metal grinds against metal. It’s like a rusty old gate creaking every time you move.
The Effects of Dirt and Rust
Dirt and rust make matters worse. If you’ve kept your rebounder in the garage or a damp corner, moisture can creep in and corrode the springs. Before long, you’re bouncing to the rhythm of squeaks instead of silence.
The Frame and Legs
The Rubbing of the Frame
Loose bolts or a slightly wobbly frame can create friction at the joints. Every bounce then becomes a little soundtrack of creaks and groans.
Loose Legs or Connection Points
If the legs aren’t tightened properly, they’ll shift and scrape against the frame. Think of it like a dining chair with a wobbly leg — it doesn’t take much movement for the noise to drive you mad.
Other Potential Sources of Noise
The Mat's Edge and Grommets
The mat itself isn’t silent either. If the edges or grommets are under strain, they can squeak as they rub during each jump.
The Bungee Cords or Screws
Some rebounders use bungee cords instead of springs, but they can squeak too. Over time, cords stretch, screws loosen, and the noise follows. A quick check can save you from the racket.
How to Fix a Squeaking Rebounder
Now we know the likely culprits, let’s get your rebounder back to its quiet best.
A Simple Lubrication Guide
What to Use: Dry Silicone Spray or Grease
Forget WD-40 — it attracts dirt. A silicone-based spray or grease is your best friend. It keeps everything running smoothly without creating a sticky mess.
Step-by-Step Instructions for Applying Lubricant
-
Spray the silicone directly onto the springs, bungee cords, or any moving parts.
-
Bounce gently a few times to spread it evenly.
-
Wipe away any drips or excess with a clean cloth.
Do this regularly and your rebounder will thank you with silence.
Tightening Loose Parts
How to Check and Tighten the Legs
Grab a spanner or the tool your rebounder came with. Check each leg, nut, and bolt. Tighten anything that feels even slightly loose.
Inspecting the Mat and Frame
Have a quick look at how the mat sits in the frame. If it’s pulled off-centre or the cords look slack, adjust them. A well-aligned mat makes a big difference.
Prevention is Key
The Importance of Regular Maintenance
A quick five-minute check every couple of weeks saves you from major problems later. Think of it as giving your rebounder a little MOT.
Storing Your Rebounder Properly
Don’t leave it outside or in damp places. Moisture is the enemy — it invites rust and shortens the life of your kit. A dry, safe spot will keep it in top shape for longer.
Final Thoughts
A squeaky rebounder isn’t the end of the world — but it is annoying. Most of the time, the fix is simple: lube it, tighten it, or realign it.
A quiet rebounder isn’t just nicer to use, it’s safer too. Take a little time to care for it, and you’ll enjoy many more silent, smooth sessions.
Happy bouncing!
Have you checked out our other posts?
Where Are BCAN Rebounders Made?
Why Are Rebounders So Expensive?
Leave a comment